3M™ Red Buffer Pad 5100 is a floor maintenance, cleaning and buffing pad made of polyester fiber in an open textured, non- woven construction. Cleaning and polishing abrasive particles are dispersed throughout and bonded to the non- woven construction with a durable resin system that permeates the entire pad. Unique design and durable construction make these pads the industry standard for consistent performance and long life.
- Designed to be used for auto-scrubbing, spray cleaning or dry buffing of hard surface floors
- For use on standard, low speed automatic scrubbers and rotary floor machines (175 – 600 rpm)
This product is used for spray cleaning or dry buffing under a rotary floor machine. It is also used for light scrubbing using water or detergent solution under standard, low speed automatic scrubbers.
For use on finish-coated flooring such as sheet vinyl, vinyl tile, marble, terrazzo or concrete.
Features and Benefits
Uniform coating throughout every 3M™ floor pad reduces the number of knots and clumps, which eliminates scratching of floors while providing greater consistency and extended pad life.
Pads are reversible and will not be significantly affected by water, detergents, or cleaners normally used for floor maintenance.
Exacting standards for quality mean thickness uniformity from edge to edge and pad to pad are exceptional, resulting in consistent performance without pad wobble or machine vibration. The precise center-hole placement and roundness of the pads also contributes to the smooth operation which extends pad life and may help reduce operator fatigue.
Packaging and Marking
Each carton shall be labeled to identify the contents by product name, size, quantity and manufacturer. Each pad shall be printed with the manufacturer’s name.
Circular discs and other shapes are available in a variety of common sizes. Pads are nominally one inch thick.
Pad Use and Cleaning
|Quick Links Technical Library Safety Data Sheets (SDS) Videos Some of these links lead to web-based resources that are not product-specific.|
Dust mop floors before and after spray cleaning or buffing. If floors are heavily soiled damp mop prior to spray cleaning or buffing. Dust mop prior to
scrubbing with an automatic scrubber. Rinse floor and let dry prior to opening to traffic.
Pads may be hosed out using a pressure spray nozzle to remove soil. Pads may be soaked in detergent solution to dissolve caked soil or finish prior to hosing out.
Store indoors in original packaging and under normal facility conditions.
|3M™ Red Buffer Pad 5100||Test Method|
|Weight (4 in. by 6 in.)||16.8 g||CCD0015|
|O.D. Dimension||Designated Size ±1/16 in.||CCD0004|
|Thickness||1 in. nominal||CCD0002|
|Alkali Resistance (Tensile Retention)||98%||CCD0005,6|
|Packaging Recycle Content||50-100% post- consumer recycled material||N/A|